Carbonpartz

Home | Shark Guards | RC51/CBR carbon clutch covers | RC51 radiator fins | Carbon fiber rearsets | CBR tank inserts/tank sides | RC51 frame protectors | CBR small exhaust guards | RC51 exhaust hangers/V-Cowl | RC51 Bonzai/Universal exhaust pipe guards | Carbon clip-on tubes/Titanium tubes | CBR1000rr Full exhaust guard | Custom/Unique Parts/Brackets | RC51 Headlight fillers | Windscreens | Ducati 1098/999 | Billet rear master cylinders & reservoirs | Black Dragon Exhaust & GP mufflers | Ducati 996/748 | Swingarm covers | 2008 CBR1KR | CBR1000rr/RC51/600rr tank guard | RC30/VFR750R | Heel Guards | 2006/08R1-ZX10r parts | 09 Yamaha R1 | RC51/1000rr hugger | RC51/CBR 1000rr front fender | About Us | Shipping and Policies | Contact Us | Aprilia RSV4 slip-on exhaust and carbon fiber parts

Aprilia RSV4 slip-on exhaust and carbon fiber parts

New from Black Dragon!!

This is the new RSV4 slip-on with slash cut GP muffler. This slip-on also is available with either black or silver ceramic coating for a additional $100 per pipe as well as many muffler options and configs. Please check the Black Dragon section for more info

New RSV4 slip-on exhaust with GP muffler
DSC08281.JPG
$475
Several muffler options available
DSC08283.JPG
Black Dragon slip-on exhaust
DSC08385.JPG
Titanium end cap carbon sleeve
Lightweight SS pipe 1400 grams total for slip-on
DSC08386.JPG
Custom mufflers available upon request
Expect 5 hp through the rev range
DSC08388.JPG
DB killers available as well as other shapes
slash cut end
apev4ex1.jpg
custom mufflers available to suit
apev4ex2.jpg
New semi gloss black and super silver
DSC08513.JPG
ceramic coatings for your slip-on
DSC08514.JPG
DSC08515.JPG
Dual twill weave kevlar gloss
DSC08499.JPG
DSC08500.JPG
Dual twill kevlar matt finish
DSC08508.JPG
GP slip-on
DSC08547.JPG
DSC08548.JPG
DSC08549.JPG
DSC08550.JPG
300mm long all ti GP muffler on SS pipe
DSC08614.JPG
Ceramic coating available for $50 per pipe
DSC08615.JPG
DSC08616.JPG
240mm carbon round with titanium ends
DSC08372.JPG
under 600 grams each
Engine case covers $100 a pair
DSC08376.JPG
Epoxy resin with kevlar inner for abrasion protection
Swingarm covers $250 a pair
DSC08377.JPG
inner layets of kevlar
Frame guards $300 a pair
DSC08378.JPG
plain weave tank pad
DSC08397.JPG
clear or matt finish available
Case covers in plain weave with kevlar inners
DSC08398.JPG
Can be done is many material choices
case cover
f7999.jpg
can be done in mayb materials too
f15199.jpg
Matt or gloss
f26847.jpg
f31551.jpg
f73631.jpg
f78687.jpg
f83871.jpg
f88959.jpg
f100543.jpg
plain weave and twill weave with kevlar inside
DSC08608.JPG
$250 a set can be done in many material choices
DSC08609.JPG
gloss or matt finish available too
DSC08610.JPG
DSC08611.JPG
Here is some examples of shark guards
DSC00018.JPG
Can do them with the cut outs too
Chain gaurds in plain weave
DSC00032.JPG
Many other materials to choose from as well